![]() ![]() ![]() Jul 26 19:10:09 iwannafly systemd: Started DisplayLink Manager Service. Jul 26 19:10:08 iwannafly systemd: Starting DisplayLink Manager Service. └─989 /opt/displaylink/DisplayLinkManager Process: 982 ExecStartPre=/bin/sh -c modprobe evdi || (dkms install evdi/1.3.54 & modprobe evdi) (code=exited, status=0/SUCCESS) Loaded: loaded (/lib/systemd/system/dlm.service enabled vendor preset: enabled)Īctive: active (running) since Wed 19:10:09 PDT 3min 8s ago `dlm.service - DisplayLink Manager Service However I get the green screen.īelow you can see dlm.service is loaded and enabled on start-up. I have installed the latest driver that you have committed this project with and it runs and installs fine. just a triple screen setup for my workflow in Debian. I just purchased Pluggable DisplayLink USB 2.0 - USB-VGA-165 (Just standard VGA is fine for me.) This is absolutely awesome of you and I would like to say that first and foremost. Overall, a great little unit (about the size of an iphone, 'though a little thicker), simple to set up, and good performance.First off I would like to thank you for your time in porting this driver over to Debian. If you do any image editing and have always wanted a multi-screen setup, this is a cheap way into it. It still allows me to load a colour calibration profile as well, which is a real plus. However, it's quite happy displaying films from my iTunes library, and playing video streamed from the internet (Catchup TV, iplayer etc) without any breakup of the picture or hangups. Given that this is the USB2 version I was expecting the unit to provide the basic functionality as an extension of my desktop. Rebooted the Mac, opened the display preferences and orientated the screens to suit the physical locations. Plugged one end into the USB port on the Mac via the supplied cable, and connected the DVI cable from the screen into the other. The unit arrived very quickly (hat tip to the supplier), and setup was a breeze. ![]() I needed to add a third screen to my iMac setup and both mini-display ports are in use, so this adaptor appeared to provide the answer. ![]() If you're interested in buying this device, check compatibility first! Of course, it would be nice if they actually listed the limitations somewhere, because I can imagine people buying this for laptops that have old or XDDM-driven graphics adapters. Don't expect smooth animation under Aero.Īll that said, I did manage to get the card working with a 2009 Macbook, but this isn't what I bought the card for. Even though it does support Aero, it does it in a way that - on my machine - makes the animation delays quite visible. Limitation #4: graphics responsiveness on this card is A LOT lower than a typical graphics card. I don't know the exact reasons for this, but my old BENQ FP202W refused to work with it over DVI. Limitation #3: if you have an old monitor, this device will only work via VGA, and not via DVI. While searching for solutions to my problem, I found hundreds of posts where people had this and that set-up not working. Not only does this mean that you cannot have these devices with this graphics card, but it also means that there are significant limitations to the way in which this device can be used. Limitation #2: this device actually works off your primary graphics card drivers. I had a Matrox card with XDDM drivers (the card was from a Windows XP era), so that was a go-go. Limitation #1: this device will only work with existing WDDM drivers. DisplayLink (the technology used by Plugable) is an interesting technology, but you must be aware of its limitations before buying. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |